GECAN - Assembly Worker III
- Markham, ON
- Permanent
- Full-time
Markham, ON.
12Months
(Payrate 23CAD)Role Summary/Purpose:
This position is responsible for assembling a variety of electronic and/or mechanical equipment to ensures products are on time for shipment. The successful candidates will read and interpret instructions, assemble parts and tools, and fit electronic components togetherEssential Responsibilities:
- Mechanical assembly of electrical assemblies and subassemblies.
- Perform mechanical work such as mounting equipment within enclosures, punching holes in panels, drilling, and tapping.
- Build wire harnesses and cables, crimp, route, and tie cables & cable harnesses
- Ability to determine wiring sequence, layout and location and ensure space allowance for arrangement of wiring and components with minimum supervisions
- Ability to assemble electrical devices and/or wire electrical control panels and subassemblies using engineering schematic and working instructions.
- Ability to provide recommendations in trouble shooting and root cause analysis of customer / product issues
- Read assembly instructions and build to process requirements
- Ability to diagnose and trouble shoot at a wiring diagram and repair/modify any errors detected by inspection / test
- Prepare product for shipment including packaging orders, performing out of box audit & physically moving materials from the production cell to the warehouse
- Transfer inventory between stocking locations in SAP
- Physical & systematic tagging, segregating, and moving of defective material to a nonconformance material location
- Issue Quality Escape Report (QER) to the appropriate personnel as required
- Participate in lean events such as 5S and basic workstation redesign
- Maintain 5S standards in the work cell
- Ensure anti-static protection is always worn to prevent damage to static sensitive parts
- Work in a safe manner and ensure appropriate training is taken to do tasks safely
- Report any incidents or injuries while on the job
- Carry out responsibilities in accordance with Client's Quality Assurance and Workmanship standards
- Abide by all Client corporate and local policies and procedures including but not limited to Integrity - The
- Spirit and The Letter, Quality Management System and Environmental Health and Safety policies.
- Assisted with cross functional team to plan and resolve production problems.
- Maintain and control accurate inventory levels in WIP by correctly conducting material transactions in a timely manner.
- Provide the material kit and accompanying paperwork for the production line. Communicate any risks to management as needed.
- Minimum High School Diploma / GED
- Holding Electrical engineering background is preferable
- Minimum of 1 year experience in manufacturing environment.
- Must be able to work up to 6 hours standing and will be required to regularly bend, stretch, etc.
- Ability to lift to 35lbs as part of daily duties.
- Flexibility and adaptability to work anywhere on the shop floor
- Ability to read assembly drawings and schematics
- Good understanding of verbal and written communication
- Good interpersonal skills are an asset, as this position will require occasional interdepartmental communications
- Basic computer skills are required
- Ability to lift up to 25lbs as part of daily duties
Payrate $20Role Summary/Purpose:
This position is responsible for assembling a variety of electronic and/or mechanical equipment to ensures products are on time for shipment. The successful candidates will read and interpret instructions, assemble parts and tools, and fit electronic components together.Essential Responsibilities:
- Mechanical assembly of electrical assemblies and subassemblies including assemble relays, cabinets, modules, chassis, cable harnesses using engineering drawing and processes.
- Build wire harnesses and cables, crimp, route, and tie cables & cable harnesses
- Ability to assemble electrical devices and/or wire electrical control panels and subassemblies using engineering schematic and working instructions.
- Read assembly instructions and build to process requirements
- Prepare product for shipment including packaging orders, performing out of box audit & physically moving materials from the production cell to the warehouse
- Transfer inventory between stocking locations in the SAP system
- Physical & systematic tagging, segregating, and moving of defective material to a nonconformance material location
- Issue Quality Escape Report (QER) to the appropriate personnel as required
- Participate in lean events such as 5S and basic workstation redesign
- Maintain 5S standards in the work cell
- Ensure anti-static protection is always worn to prevent damage to static sensitive parts
- Work in a safe manner and ensure appropriate training is taken to do tasks safely
- Report any incidents or injuries while on the job
- Carry out responsibilities in accordance with Client's Quality Assurance and Workmanship standards
- Abide by all Client corporate and local policies and procedures including but not limited to Integrity - The Spirit and The Letter, Quality Management System and Environmental Health and Safety policies.
- Assist with cross functional team to plan and resolve production problems.
- Minimum High School Diploma / GED
- Minimum of 1 year experience in manufacturing environment.
- Must be able to work up to 6 hours standing and will be required to regularly bend, stretch, etc.
- Ability to lift to 35lbs as part of daily duties.
- Proficiency in SAP and material transactions
- Basic computer skills are required
- Ability to read assembly drawings and schematics
- Flexibility and adaptability to work anywhere on the shop floor
- Good understanding of verbal and written communication
- Good interpersonal skills are an asset, as this position will require occasional interdepartmental communications.