Maintenance - Electrician Maintenance

Flex-N-Gate

  • Windsor, ON
  • Permanent
  • Full-time
  • 13 days ago
JOB SUMMARY:Repair, and maintain all electrical equipment in and on the facility. Install new equipment, power feeds and distribution. Must change End of Arm tooling and programs for robots when molds are changed. Must be able to create new robot programs, to connect online with plc’s and successfully troubleshoot problems. Must be able to create plc programs and HMI programs. As well work to a preventative maintenance program. Be able to work within a team of maintenance personnel to repair, troubleshoot and maintain injection molding equipment and electrical systems including building, robotics, PLC’s and distribution equipment.GENERAL RESPONSIBILITIES:
  • All work must be performed in a safe, efficient manner in compliance with Company
Policy, local, provincial and/or federal rules and regulations and the Collective Agreement;
  • Contributes to team effort by accomplishing related results as needed;
  • Awareness and understanding of Environmental Policy (ISO 14001) and Quality Policy (TS 16949) guidelines and how the position’s responsibilities impacts on environment and quality;
  • Shows leadership to the workforce by his/her decision-making skills, motivational efforts, fairness and consistency so that employees are well aware of their performance and individual importance in the department;
  • Ensures personnel performing work affecting product quality shall be competent on the basis of on-going training, appropriate education, skills and experience;
  • Performs other duties as required by Manager/Supervisor to keep pace with changes in the scope of work.
SPECIFIC RESPONSIBILITIES:
  • Reports directly to the Maintenance Manager and can be directed by maintenance and operation supervisors;
  • Responsible for keeping equipment safe and reporting any unsafe practices;
  • Completes assigned work in a timely manner;
  • Responsible for troubleshooting, assessing and rectifying breakdowns;
  • Must show initiative in the constant improvement of process and safety;
  • Responsible for the preventative maintenance on assigned equipment;
  • Must keep work areas clean and safe;
  • Must record time and specifics in the maintenance log book and start and end downtime in the production system;
  • Read and Decipher blueprints pertaining to equipment and building;
  • Work must be completed to the satisfaction of The Canadian Electrical Code;
  • Responsible for the reporting of issues identified on equipment pertaining to but not withstanding equipment and building electrical or mechanical;
  • Other duties, as assigned.
WORKING CONDITIONS:QUALIFICATIONS:EDUCATION:
  • Grade 12 Diploma or Equivalent;
  • Must possess a 422A license in Ontario.
EXPERIENCE: Mechanical Background.REQUIRED TRAINING:
  • Certified crane operation;
  • Must successfully complete lock-out and fall arrest training;
  • Must be able to learn and program robots within the facility;
  • Must be able to learn and troubleshoot PLC’s through ladder logic;
  • Must successfully complete aerial lift training.
RECOMMENDED TRAINING: WHMIS.SKILLS & COMPETENCIES AS FOLLOWS BUT NOT LIMITED TO:
  • Good communication (Read and comprehend instructions);
  • Organizational and dexterity skills;
  • Attention to detail;
  • Computer skills;
  • Ability to read Electrical Schematics;
  • Proficient Mechanical Background;
  • Problem solving skills;
  • Knowledge of components and materials used in the production process.

Flex-N-Gate