Maintenance Technician
Bureau Veritas View all jobs
- Vancouver, BC
- $25.00 per hour
- Permanent
- Full-time
- Ensure that equipment that requires external calibrations are monitored to have the calibration carried out by qualified calibration services to comply with requirements of ISO 17025.
- Comply with all occupational safety regulations, laboratory safety procedures and as required, requirements of ISO Quality System SOPs.
- Act in a safe and professional manner and wear appropriate attire including the required personal protective equipment (PPE).
- After consult manufacturer's manuals, circuit diagrams and blueprints, assist in the maintenance, inspection and test operation of all monitoring instruments used throughout the facility.
- Assist in the monitoring, documentation and record keeping of equipment and calibrations.
- Perform the daily monitoring and control of deionized water system, facility compressed gas systems, acid neutralization system and exhaust system bearing temperature measurements recording.
- Carry out general maintenance of building and grounds as required.
- Responsible for update the CMMS with proper data according to company SOPs.
- Responsible for maintaining and replacing sheaves, bushings, belts, pillow blocks, and bearings on make-up air units and exhaust fans, including repair and adjust system components.
- Responsible for the maintenance of building environmental systems, including wash down air scrubbing systems, exhaust fans, make up air units, dust collection systems, etc, including repair and adjust system components.
- Responsible for the maintenance of equipment used throughout the facility, such as rock crushing and pulverizing machines, gas and electric furnaces, hot plates, digestion blocks, fume hoods, etc.
- Responsible for maintaining pneumatic and hydraulic systems as well as belt and chain driven equipment throughout the facility.
- Responsible for adjusting and controlling the BMS system to provide proper ventilation and temperature control for the facility.
- Other duties or task as required or assigned by Manager and/or Supervisor
- Able to handle heavy loads up to 50 lbs on a regular basis, and up to 75 lbs on occasion.
- Able to work at heights above 30 feet from boom lift systems with required Fall Protection.
- Good communication skills in English, both verbal and written.
- Strong organizing and time management skills.
- High trades aptitude required; intention to enroll on ITAs Trades Apprentice Programs is an Asset.
- Experience dealing daily with CMMS an asset.
- Experience in operating hand operated tools & equipment, being able to perform measurements accurate to 0.01mm for shaft and bearing alignments of equipment.
- Ideally with 2+ years' experience with mechanical and/or building repairs.
- Instrumentation, HVAC, plumbing, electrical or mechanical experience an asset.
- Health & Dental Coverage
- Life Insurance
- STD & LTD Coverage
- Company RRSP match
- Employee Assistant Program (EAP)
- Professional Development