Stamping Press Operator

• Scribe reference lines on workpieces as guides for cutting operations, according to blueprints, templates, sample parts, or specifications.
• Set blade tensions, heights, and angles to perform prescribed cuts, using wrenches.
• Place workpieces on cutting tables, manually or using hoists, cranes, or sledges.
• Thread ends of metal coils from reels through slitters and secure ends on recoilers.
• Turn valves to start flow of coolant against cutting areas or to start airflow that blows cuttings away from kerfs.
• Replace defective blades or wheels, using hand tools.
• Turn controls to set cutting speeds, feed rates, or table angles for specified operations.
• Hand-form, cut, or finish workpieces, using tools such as table saws, hand sledges, or anvils.
• Grind out burrs or sharp edges, using portable grinders, speed lathes, or polishing jacks.
• Sharpen dulled blades, using bench grinders, abrasive wheels, or lathes.
• Remove housings, feed tubes, tool holders, or other accessories to replace worn or broken parts, such as springs or bushings.
• Hone cutters with oilstones to remove nicks.
• Select, clean, and install spacers, rubber sleeves, or cutters on arbors.
• Preheat workpieces, using heating furnaces or hand torches.

• High School Completion Preferred

• Good mechanical aptitude.
• Ability to follow written and verbal instructions.
• Ability and willingness to learn press and die troubleshooting.
• Ability and willingness to learn quality control equipment and techniques
• Good physical dexterity.
• Ability to lift 50 lbs. repeatedly.
• Ability to visually distinguish detail.

• Must be able to lift 50lbs
• Standing for an 8-hour shift

Inspire Talent Consulting